LED Lighting Supply case studies

LED Lighting Supply has 12 project case studies in this directory, covering pickleball, baseball, other, soccer, tennis and swimming. Most are courts (5) and fields (4), in 9 locations. Each one sets out the challenge, the solution and the result, with project details such as size and the products used.

See the products behind these projects on the LED Lighting Supply products page.

On this page: Notable projects · FAQs

Showing 12 of 12 case studies

No case studies match these filters. Choose "All" to see everything.

Notable LED Lighting Supply projects

A few of the standout projects, from indoor pickleball franchises to a racetrack and a night-skiing slope.

  • Match Point Pickleball Club, Columbus: 38 indoor courts lit to about 98 fc with 158 LED high bays on a custom plan, LED Lighting Supply reports.
  • The Picklr: LED Lighting Supply became the franchise's preferred lighting partner, supplying a custom lighting plan for each of 39 indoor pickleball locations, according to the company.
  • Worthington Speedway: 41 aging 1500 W metal halide fixtures were replaced with 600 W marine-grade LED floods, saving $24,240 a year, the company says.
  • Spartan Sports Park: baseball lighting energy use fell 65 percent after 1000 W metal halides were replaced with 400 W LED floods, according to LED Lighting Supply.
  • Pocahontas natatorium: 13 LED high bays replaced 400 W metal halides one for one at about 30 fc, with no fixtures over the water, the company says.
  • Tussey Mountain: a previously dark slope was lit for night skiing with 45 LED floodlights on new wood poles, LED Lighting Supply reports.

Frequently asked questions

What kinds of projects has LED Lighting Supply lit?

The case studies cover indoor pickleball clubs and franchises, baseball, soccer and football fields, a racetrack, a natatorium, resort courts, indoor tennis courts and a night-skiing slope.

Does LED Lighting Supply work with pickleball franchises?

LED Lighting Supply reports several. It became The Picklr's preferred lighting partner with a custom plan for each of 39 indoor locations, Pickleball Kingdom adopted its Plano high bay plan as a franchise standard across 16 locations and more than 1,700 fixtures in two years, and Match Point Pickleball Club lit 38 indoor courts with 158 LED high bays.

Can LED floods reuse existing poles?

LED Lighting Supply reports several retrofits on existing poles. Emerald Playground Association lit two Little League fields with 101 LED floods on existing poles, Performance Indoor Training's soccer field went from about 1 fc to 7 fc on its four existing poles, and St. Francis Borgia High School replaced 1,500 W metal halides on four 60-foot poles with 48 LED floods at about 34 fc.

How much energy can an LED retrofit save?

Two reported examples: Spartan Sports Park cut baseball field lighting energy use by 65 percent, and Worthington Speedway saved $24,240 a year after replacing 41 metal halide fixtures. These are LED Lighting Supply's figures, and results vary by site.

Has LED Lighting Supply lit pools or unusual sites?

Yes. A Pocahontas, Arkansas natatorium replaced 400 W metal halides with 13 LED high bays at about 30 fc, with no fixtures over the water, Tussey Mountain lit a night-skiing slope, and the St. Kitts Marriott resort relit its courts with LED shoebox lights at 21 fc.

Where have these projects been completed?

Across several US states, including Ohio, Texas, Pennsylvania, Illinois, Missouri, Minnesota and Arkansas, plus a resort in St. Kitts. Use the Location filter above to narrow the list.

See the full LED Lighting Supply company profile for contact details, certifications and more.

Add Listing

Wondering if you already have a Listing on our platform? Click here to find out.

Claim Listing

Find and take control of any Listings you have on our platform. No Listing to Claim? Click here to add one.

Questions?

Sending message to

—

1
Your project
2
Project status
3
Your details

What are you planning?

Tell us what you are planning. Be specific to help the supplier understand your project’s situation.

Step 1 of 3

Where is the project at?

Three quick taps. This helps the supplier respond with the right level of detail. All optional.

Your contact details

So we can connect you with the right supplier.

✅

Message sent!

Thanks — we’ll review your enquiry and connect you with the right supplier shortly.